Table of Contents
Advertisement
H.264 images are
not displayed.
The connected
camera cannot be
controlled.
Image is grainy or
shows little detail
•
When "Network Camera View 4S" is deleted from a PC
on which both the viewer software "Network Camera
View 3" and "Network Camera View 4" are installed, H.
264 images may not be displayed.
In this case, delete "Network Camera View 3" from the
PC and then install "Network Camera View 4S".
•
Confirm that the RS485 settings match
those required for the Thermal Camera
•
This can be a result of weather
conditions. The Thermal Camera differs
from a visual camera by relying on
variances in temperature. Some weather
conditions such as rain can cause areas
of uniform temperature that will therefore
appear the same when viewed through a
thermal camera.
19 Troubleshooting
-
8.5
Operating Instructions
107
Advertisement
Table of Contents
