Sanyo VW-VF10BG Technical Data & Service Manual page 7

2. Unit built-in control section
CHILD LOCK lamp
CHILD LOCK button
DRAIN/DRY lamp
DRAIN/DRY button
FILTER RESET button
3. Unit front display
FILTER lamp (red)
CHECK lamp (red)
G
Indicator lamp display
Indicator lamp status
CHECK FILTER DRAIN
(red) (red) (red)
– – –
– – –
– – –
– – –
– – ON
– – –
– ON –
ON – –
Blinking – –
– – –
G
TREATED AIR VOLUME indicator
Indicator lamp status
* This is a guide assuming a room floor area of 100 m
Operating mode
Indicates the fan speed.
LOUVER button
ADD WATER lamp (red)
DRAIN lamp (red)
ADD WATER SAVER OPERATION
(red) (green) (green)
– – ON
– – Blinking Unit is preparing for operation.
– ON ON
ON – ON
– – –
– – –
– – ON
– – ON
– – ON
– Blinking ON
2
ON/OFF button
FAN SPEED button
Press this button to change
the fan speed.
OPERATION lamp (green)
HUMIDITY SAVER lamp (green)
Unit is operating.
Reduced water usage is in effect.
Water must be added to the water tank.
Discard the water that has accumulated in the
drainage tank.
Water drainage is in progress. The DRAIN/DRY lamp on
the control section lights.
The filter must be cleaned.
The replacement time for electrolysis tank has been
reached. Contact the dealer where the system was
purchased.
Error: Contact the dealer where the system was
purchased.
Freeze prevention function has been activated.
Cleaning of the room* air has started.
The air in the room has been cleaned 1 time.
The air in the room has been cleaned 2 times.
The air in the room has been cleaned 3 times.
The air in the room has been cleaned 4 times.
The air in the room has been cleaned 5 times.
and a ceiling height of 3 m.
1 - 3
Features
Meaning
Meaning
1