Declaration Of Conformity - Sanyo VW-VF10BG Technical Data & Service Manual

When the FILTER lamp lights, wash the scale filters.
If the filters are particularly dirty, replace them with new filters
(at charge to the customer).
The scale filters can be replaced by the customer,
however a regular maintenance contract is recommended.
Request new filters from the dealer where the system was
purchased.
CAUTION
G Verify that the system is stopped.
1.
Remove the water tank.
2.
Pull out the scale filters (6 filters) located on the bottom.
3.
Insert the new scale filters, taking care that they are
facing in the correct direction.

11. Declaration of Conformity

This product is marked "
and conforms with relevant standards.
This declaration will become void in case of misusage and/or from non-observance of manufacturer's
installation and/or operating instructions.
Replacing the scale filters
Scale filters
" as it satisfies EEC Directive No. 89/336/EEC, 73/23/EEC and 93/68/EEC,
2 - 14
Using this System
Water tank
Insert filters
facing in this
direction.
(Down)
Pay attention to the direction that the
tube faces when inserting the filters.
Scale filters
2