Replacing The Solenoid Valves - Sanyo VW-VF10BG Technical Data & Service Manual

10. Replacing the solenoid valves

1 Stop the system and unplug the power cord.
2 Remove the top and bottom parts of the front panel.
3 Remove the water tank. Remove the divider panel A (4 screws),
then remove the electrolyzed water tray cover (2 screws) and
remove the electrical component box cover (4 screws).
4 Remove the 3 screws that fasten the top panel and the 16 screws that fasten the rear panel.
Then lift up the top panel (1) and pull the rear panel back in order to remove it (2).
Top panel
5 Remove the outer right side panel (6 screws), then remove the inner right side panel (5 screws).
Electrical component box cover
Divider panel A
Electrolyzed water tray cover
Screws (3)
Rear panel
Screws (6)
Outer right
side panel
6 - 13
Maintenance Procedures
Top panel
(1)
Screws (16)
(2)
Rear panel
Screws (5)
Inner right
side panel
6