Advertisement
Antenna
& Cable/STB
Select the type of connection you will use to watch TV.
6 Press _
to select "Antenna
& Cable" or "Set-top
box",
and then press ENTER.
_To
watch TV, select the input source corresponding
to
the terminal connected
to the set-top box. When doing
so, you must make the setting to skip "TV". Press _1_/_to
select "On", and then press ENTER.
To watch
TV via an antenna
or cable connection
(without
using a set-top box):
Select
"Antenna
& Cable",
and then go to step 7.
To watch
TV via a set-top
box:
_Select
"Set-top box", and then press ENTER.
_Check
that the set-top box connected
to the TV is on.
_Press
_
to select the input to which the set-top box
has been connected.
• If your Set-top
box is turned off, "Disconnected"
might be
shown.
• When this is set to "On", the channel on the TV cannot
be changed using the remote control unit or menu. (e.g.
CH Z%J_M _, Favorite CH, etc.)
• See Dace 4-20 for details on the Input Skip function.
_Press
INPUT to select the input source corresponding
to
the terminal connected
to the set-top box. Make the
necessary
settings on the connected
external equipment.
• See the operation manual of the connected
equipment for
setting up the equipment.
Air/Cable
(Antenna
setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
7 Press _to
select "Air" or "Cable".
Press ENTER to enter the setting.
ENG 2-4
Advertisement
