Advertisement
9CREW
WAUL MOUNT
_.
UNrT
M0 JsNTI
01_[_" H OF
HOLES
_
%, _ MOde4? NG k¢OLE£
For the screws, refer to the table shown below.
90/80 inch models
Standard screws
M8 (Use 1.25 pitch screws.)
Length(Depth
of mounting
holes)
15/32 (12)
Quantity
4 pcs.
70/60 inch models
M6 (Use 1.0 pitch screws.)
15/32 (12)
4 pcs.
• Do not mount the TV at a tilt.
• To use this TV mounted on a wail, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV.
• Do not fasten the screws too firmly or loosely. This may damage
the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
• SHARP is not liable for product damage
or personal injury when a non-VESA
or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
_stall
the wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
ENG 11-5
Advertisement
