Advertisement
Command
format
Eight ASCII codes +CR
Command
4-digits:
Command. The text of four characters.
Parameter 4-digits:
Parameter 0-9, x, blank, ?
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4
values are input for the parameter.)
When the input parameter is not within an adjustable
range, "ERR" returns. (Refer to "Response
code format".)
Any numerical value can replace the "x" on the table.
comm_qds
he
iiliCi i;iJ
Response
code format
Normal response
Problem
response
(communication
error or incorrect command)
Command
table
• Commands
not indicated here are not guaranteed
to operate.
POWER ON
R
S
P
W
0
Off
COMMAND
SETTING
POWER SETTING
P
O
W
R
INPUT
TOGGLE
I
T
G
D
SELECTION
TV
I
T
V
D
1-8
I
A
V
D
0
1
x
On [RS-232C]
On [IP]
Power
Off
Power
On
(Toggle)
1: HDMI IN !,
2: HDMI IN 2,
3: HDMI IN 3,
4: HDMI IN 4,
5: COMPONENT
IN,
6: VIDEO
IN 1,
7: VIDEO
IN 2,
8: PC IN
The Power On
command
rejected.
The Power On
command
accepted.
The Power On
command
accepted.
It shifts to
standby.
Power On
It input-switches
by the toggle. (It
is the same as
an input change
key)
It input-switches
to TV. (A
channel
remains as it is.
(Last memory))
• If an underbar
(_) appears
in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL
CONTENTS.
• Any numerical value can replace the "x" on the table.
ENG 8-4
Advertisement
