Advertisement
Wireless
Setup
Make adjustments
and confirm the settings necessary for
wireless
LAN connection (such as search for the access
point and registration
of it).
WPS push button:
Allows the TV to automatically
establish
the connection
using a button on the access
point.
WPS PIN code:
Sets up the connection
by registering a
PIN code for the access point.
Selecting
wireless
network:
Searches for and selects the
access point to be connected.
Registering
wireless
network:
Allows you to make the
connection
by entering an SSID for the access point.
If your access point supports Wi-Fi Protected Setup (WPS
push button method), it is recommended
that you use this
function for the wireless connection.
You can press the WPS
button on the access point to configure
the settings
automatically.
• The name of the WPS button function may differ
depending on the access point. See the operation
manual of the access point for details.
1 Confirm the current settings in "Connection
Type".
• If "Wired" is selected, press _
to select "Wireless".
2 Press _V
to select "Wireless Setup", and then press
ENTER.
• Confirm the settings.
If each setting item is correct,
press MENU to exit.
• If you are configuring
the wireless
setup for the first
time or changing the settings, go to step 3.
3 Press _
to select "Change", and then press ENTER.
4 Select the desired connection
method and follow the
instructions
shown on the display.
5 When a connection
is established, the connection
details
are displayed.
Press ENTER.
• Operations
cannot be guaranteed
when used with access
points that do not have Wi-Fi®
certification.
• A wireless LAN router/access
point is required to connect
the TV to the Internet using a wireless
LAN. See the
operation manual of your access point for setup.
• If your access point is set to a stealth mode (that
prevents detection
by other devices), you may not be
able to establish a connection.
In this case, disable the
stealth mode on the access point.
• A stable connection
speed is required to play back
streaming content. Use an Ethernet connection
if the
wireless
LAN speed is unstable.
• Before transferring
to a third party or disposal, be sure to
initialize the wireless LAN settings.
• Please follow the legislation
in your country when using
the wireless
LAN outdoors.
IP Setup
You can make adjustments
manually for the IP.
• Check that numbers are displayed for each setting.
• If there are any settings without numbers, specify the
numbers by following the on-screen
instructions.
• Input the IP address by using remote control buttons 0-9.
Example
ENG 9-3
Advertisement
