Advertisement
i_=_ _ i]%ii
i{J!i¢ ii + i_++
ii ¢ i +===_
iii _I;_ +_/i
i ;; ; + iiiiiii,_[?+ __++_
_+=1]+_i+ iiii)i%= _]+
ii + iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
)_[_ I +1iilI+ _!! i
iiiii==iiiiiii_+_@_
i
1ii_,,+ i '
!iiii _;, i_=_=_=_=_
iii_
You can adjust the 3D image to the desired image quality
and make various settings for 3D image viewing.
• Set AV MODE and "3D Brightness
Boost" with "Picture
Settings".
• Set the 3D viewing settings with "Setup" > "3D Setup".
• Which items can be selected/adjusted
differs depending
on whether the TV is in 2D mode or in 3D mode.
The audio and video settings can be changed to suit the
program or input content being watched.
3D: For a highly defined image in a normal lighting.
GAME (3D}: Lowers image brightness
for easier viewing.
For the LE657U model
STANDARD
(3D): For a highly defined image in a normal
lighting.
MOVIE (3D): For a movie.
GAME (3D): Lowers image brightness
for easier viewing.
• You can select AV MODE by pressing AV MODE on the
remote control unit.
You can adjust the backlight of the TV for 3D image viewing.
High/Middle/Low:
Select a desired level of 3D Brightness
Boost.
• When "High" or "Low" is selected, "Automatic
Light
Sensor", "Backlight" and "Light Sensor Adjustment"
are
not available.
You can make various settings to enhance 3D image
viewing.
This setting can be used to switch to 3D mode automatically
when a 3D identification
signal is detected.
Set the desired mode according to the type of media you
are viewing,
such as video from a connected
device or video
from an internet application.
Mode 1: 3D mode is selected
automatically
when a 3D
signal is detected while viewing video from a VOD
service or HDMI-connected
equipment.
Mode 2: 3D mode is selected
automatically
when, in
addition to detecting a 3D signal while viewing video
from a VOD service or HDMI-connected
equipment,
a
video pattern with "Side by Side" or "Top and Bottom"
format is also detected.
Off: Auto change is not performed.
• This function does not work when the input source is
Composite, Component,
RGB or Analog/Digital
tuner.
Select the method for adjusting the 3D depth.
Auto:
The depth is adjusted automatically.
Manual: You can manually adjust the depth using the
function "Depth Change".
• This function is only available
when the input signal is
3D.
• This function may not be displayed depending
on the type
of 3D signal.
ENG 5-11
Advertisement
