Advertisement
Example
Available
only when AV MODE is set to "VINTAGE
MOVIE"
MODE. When this function is enabled, the lamp light looks
like it is swinging. You can adjust the effect level between 0
and +3.
For viewing a video in monochrome.
You can adjust picture quality according to the type of the
game you are playing.
Standard:
Optimizes
picture quality for standard video
games.
High Motion:
Optimizes
picture quality for high motion
video games,
• "Game Type" is not available depending on the input
signal type.
• "Game Type" is only available when AV MODE is set to
"GAME" and "Resolution
Enhanced" is set to "OFF".
Adjusts on-screen
black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
• "Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts
(air and
cable).
The brightness
level range of the Light Sensor's automatic
adjustments
can be set according to your preferences.
The adjustment range of the Light Sensor can be set to a
maximum of +16 and a minimum of -16.
Max.: -15 through +16
Min.: -16 through +15
• The "Light Sensor Adjustment"
settings are active only
when "Automatic
Light Sensor" is set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending
on the brightness
of the surrounding
light, the
Light Sensor might not operate if the adjustment
range is
small.
Returns Picture Settings to their factory preset values. To
reset, select "YES" and then press ENTER.
ENG 4-10
Advertisement
