Advertisement
CH Search (Channel
search)
Channel auto search makes the TV look for all channels
viewable in the set area.
8 When
"Air"
is selected
in Antenna
setting:
Press _
to select "Start", and then press ENTER.
_he
Channel search results may include scrambled
channels or channels that are not viewable in the set
area. Press _
to select "Yes", and then press ENTER
to remove scrambled
channels.
When
"Cable"
is selected
in Antenna
setting:
_Press
_
to select "Analog & Digital Search Start" to
search both analog and digital broadcasts,
or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
Smart TV
When you connect to the Intemet on the TV, select the
desired connection
method and follow the instructions
shown
on the display.
• Wireless
LAN connection
is possible only when the WPS
(push button) method is used. If any other method is
used, make settings by Smart TV > Internet Setup >
Intemet Connection.
(See Daaes 9-2 to 9-43
9 Press ,I!_, to select "Yes", and then press ENTER.
10 Press _
to select "Wired" or "Wireless",
and then
press ENTER,
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
ENG 2-5
Advertisement
