Make A Copy - Canon imagePRESS C800 Series Operation Manual

Make a copy

You start a copy job from the automatic document feeder or the glass plate. When the scan area
has scanned the originals, the copy goes to the destination you indicated.
1
2
For more information, see:
About copy jobs on page 55
Copy job settings on page 236
Use templates for recurring jobs on page 66
Copy subsets (combined copying) on page 67
Before you begin
Read the instructions detailing how to use the automatic document feeder and the glass plate.
Use the automatic document feeder to copy or scan on page 59
(See
copy or scan on page
Procedure
1. Place a set of originals into the automatic document feeder or place an original on the glass plate.
2.
Touch [Jobs] -> [Copy/Scan].
3.
Select a copy template.
4.
Define the original settings in the [Original] pane (1).
5.
Define the output settings in the [Output] pane (2).
6. Enter a job name and the number of sets in the [Job] pane (3).
7.
Select the destination of the copy (3).
To scan now and print later, select the list of waiting jobs or a DocBox .
8.
Check the results of your settings in the preview pane (4).
9. Touch the start button
imagePRESS C800 Series
5
61)
.
3
4
or
Chapter 3 - Prepare the jobs
Make a copy
Use the glass plate to
63