Handle Media; Check And Prepare Media Before Loading - Canon imagePRESS C800 Series Operation Manual

Handle media

Handle media

Check and prepare media before loading

Before you load media into the paper trays, it is important to check and prepare the media.
When there are load and storage instructions on the paper package, follow these instructions.
When you print on media that have absorbed moisture, steam may be released from the output
area of the machine. This is due to the evaporation of moisture in the paper caused by the high
temperature in the print module.
CAUTION
• When loading paper, take care not to cut your hands on the edges of the paper.
• Do not store media in places exposed to open flames. This can cause the paper to ignite
which could result in burns or a fire.
NOTE
• Use paper recommended by Canon for high-quality output.
• Some commercially available media types are not appropriate for your print system. Contact
your local authorized Canon dealer to order media. (See
For more information, see:
Media specifications on page 289
Check and prepare envelopes before loading on page 132
Check and prepare transparencies before loading on page 134
Procedure
Action
1 Make sure the media specifications match the paper tray specifications. (See
put specifications on page
2 Check that the media is in good condition.
130 Chapter 5 - Print the jobs
270)
IMPORTANT
Do not load the following media. This can cause a paper jam.
• Severely curled or wrinkled paper
• Thin straw paper
• Heavy paper (more than 220 g/m² / 80 lb cover)
• Paper which has been printed using a thermal transfer printer
• The reverse side of paper which has been printed using a thermal transfer
printer
• Tracing paper
Consumables on page
185)
Paper in-
4
imagePRESS C800 Series