Check And Prepare Envelopes Before Loading - Canon imagePRESS C800 Series Operation Manual

Check and prepare envelopes before loading

Check and prepare envelopes before loading
Before you load envelopes, it is important to check and prepare the envelopes. You can load
envelopes in all paper trays and the special feeder.
IMPORTANT
• Do not print on the back side of the envelopes (the side with the flap).
• Do not load the following types of envelopes. This can cause a paper jam, dirty printed output
or dirty machine parts:
• Curled, creased, or folded envelopes
• Very thick or thin envelopes
• Damp or wet envelopes
• Torn envelopes
• Irregularly shaped envelopes
• Envelopes with clasps or windows
• Envelopes that are already sealed
• Envelopes with holes or perforations
• Envelopes with specially coated surfaces
• Envelopes made of surface treated colored paper
• Envelopes that are self-adhesive and use ink, glue, or other substances that can melt, burn,
vaporize, or emit smells by the heat of the fixing unit (approximately 200°C). Melted glue
can cause sealed envelopes.
• When there is a temperature difference between the storage location and the location where
the envelopes are printed, take the envelopes to the print location on time.
CAUTION
• When you handle paper, be careful not to cut your hands on the edges of the paper.
• Do not store paper in places exposed to open flames. This can cause the paper to ignite
which could result in burns or a fire.
For more information, see:
Supported envelope types by paper input optional on page 292
Action
1 Make sure the media specifications match the paper tray specifications. (See
put specifications on page
2 Take five envelopes and fix curls or bends.
3 Loosen and stack the five envelopes together.
132 Chapter 5 - Print the jobs
270)
Paper in-
4
imagePRESS C800 Series