Schedule - Canon imagePRESS C800 Series Operation Manual

Schedule

Schedule
The optional schedule predicts the total production and offers a daily (up to eight-hour) plan
board. The schedule provides all information on the scheduled jobs, so you are able to intervene
when needed and keep your print system running.
The user interface of the schedule shows the following information:
• The availability of media for the scheduled jobs.
• The availability of the output trays of finishers and the high capacity stacker.
• Prediction of the time the job is ready.
• Prediction of the time the print system stops.
Not all information of the schedule is applicable for the transaction printing mode. When the
transaction printing mode is active, the schedule only shows information on the status of the
output and input locations, and the supplies. (See
The information of the schedule in the document printing mode
[71] The schedule for the document printing mode
The information of the schedule in document printing mode:
• The timeline (1) shows the job and its estimated print time. The vertical red-white bar indicates
when the print system stops. This bar appears when you stop a job, but the stop can also be a
behavior of the active workflow profile.
• The required media pane (2) shows the required media for the jobs. The color of each media
bar indicates if and how long these media are available.
• The system overview (3) shows which paper tray the print system uses for the selected media
in the required media pane.
• The output location bar (4) shows the availability of the output locations. The vertical red-white
bar in the output location bar indicates when a stack eject of the high capacity stacker occurs.
The print system does not go on hold after a stack eject.
• The zoom menu (5) allows you to select a shorter or longer time scale.
122 Chapter 5 - Print the jobs
2
4
Transaction printing on page
1
87)
5
imagePRESS C800 Series