Correct Curled Output Media - Canon imagePRESS C800 Series Operation Manual

Correct curled output media

Correct curled output media
Media can arrive curled in the output tray. This is caused by temperature differences during the
print process. You can perform a correction procedure to prevent curled sheets in the output
trays. The results of the correction are immediately effective for jobs that use these media.
For media that need a curl correction on the length and width, create two different entrances in
the media catalog. The correction procedure changes the media attributes in the media catalog,
so that the adjustments are applied to all jobs that use the same media. You can find the
correction values in the system adjustment settings of the Settings Editor (Preferences tab).
For more information, see:
Problem Solving on page 230
Automatic color mismatch correction on page 171
Media for your output on page 21
Before you begin
Make sure that all media attributes are correct in the media catalog.
Procedure
1. Touch [System] -> [Media].
2.
Select the media from the media catalog.
3. Press [Curl correction].
4.
Define the correction factor with the + and - buttons.
Start with small increments to avoid paper jams.
5.
Press [OK].
176 Chapter 6 - Keep the image quality high
imagePRESS C800 Series