Table of Contents
Advertisement
10.
BEFORE MAKING A SERVICE CALL
Symptom
No image
• Is the power supplied correctly?
• Is the lens iris adjusted correctly?
• Are the cables connected correctly?
• Is the shutter mode set correctly?
• Is the image process equipment set correctly?
Poor color
• Is the monitor adjusted correctly?
• Is the white balance of the camera adjusted correctly?
• Is there enough illumination?
11.
SPECIFICATIONS
Power supply
Power consumption
Pick-up system
Image sensor
Scanning System
Video output pixels
Pixel clock frequency
Sync signal frequency
Sync system
Sensitivity
Minimum illumination
Lens mount
Ambient temperature
Ambient humidity
Weight
External dimension
White balance
Gain
Partial scanning
Output signal
Sync signal output
External sync input
External trigger input
Partial scanning control
signal input
Interface
The designs and specifications are subject to change without notice.
If any change occurs, we will revise the manual, etc.
DC 10V ~ DC 13.2V
Approx. 3.1W (When the DC power supply is 12V)
RGB, 3CCD
1/3inch All pixels CCD
(Effective pixels Horizontal : 1034, Vertical : 779)
Progressive scan
Horizontal pixels : 1024, Vertical : 768
29.5MHz
Horizontal : 23.229kHz, Vertical : 29.18Hz
Internal/External (Automatic switching)
F6.8 standard (2000 lx, 3000K)
14 lx (F2.2, Sensitivity + 18 dB, 3000K)
C mount (flange back : 17.526 mm in-air)
0 to 40°C (32 to 104°F)
Less than 90%
Approx. 158g (0.338lbs)
44 (W) x 44 (H) x 78 (D) mm
(1.73" (W) x 1.73" (H) x 3.07" (D)) (except for protruded portion)
AWB (Automatic white balance), MANUAL (Manual)
MANUAL (Manual), OFF (0 dB)
40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
8-bit RGB, Digital output (Camera Link format)
FVAL, LVAL, DVAL (Positive polarity)
Pixel Clock
HD : CC3 (LVDS input) Negative polarity
VD : CC4 (LVDS input) Negative polarity
CC1 (LVDS input), More than 2 μs pulse width
CC2 (LVDS input)
Serial data interface : Ser TC (RXD), Ser TFG (TXD)
Items to be checked
37
Advertisement
Table of Contents
