Ss (Synchro. Scan) Mode; (1. 3) Changing The Setting In - Toshiba ik-tf7p2 Instruction Manual

(1. 2) Changing the setting in SS (synchro. scan) mode
Move up down
by pushing
MENU UP, DOWN
SHUTTER
MODE
SS
OUT.P
<MODE = SS>
(a) Changing the shutter speed setting
Move the " " to SS by pushing [MENU UP], [MENU DOWN] buttons.
a
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
a
(b) Partial scanning setting
Move the " " to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
a
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
a
Move " " to the current value by pushing [MENU UP], [MENU DOWN] buttons.
ca
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
da
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a characteristic of
CCD, and is not a symptom of malfunction.
Select the desired
value by pushing
DATA UP, DOWN
SS
OFF
OFF
• Shutter mode MANU, SS, E.TRG, AUTO
• Synchro. scanning setting
refer to the item "7.3 Synchro. Scan Operation".
• Partial scanning switch PART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
15