Toshiba ik-tf7p2 Instruction Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Security Camera
  5. ik-tf7p2
  6. Instruction manual

Toshiba ik-tf7p2 Instruction Manual

3 ccd color camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3 CCD COLOR CAMERA
IK-TF7P2
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if
you make changes or modifications not expressly approved by the party responsible for compliance to
Part 15 of the FCC Rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.
Following information is only for EU-member states:
In residential areas this product may cause radio interference, therefore this product must not be used
in residential areas.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about the take-
back and recycling of this product, please contact your supplier where you purchased the
product or consult.
This manual is made from recycled paper.
INSTRUCTION MANUAL
For Customer Use
Enter below the Serial No.
w h i c h i s l o c a t e d o n t h e
bottom of the cabinet. Retain
this information for future ref-
erence.
Model No.:
Serial No.:
IK-TF7P2

Advertisement

Table of Contents
loading

Related Manuals for Toshiba ik-tf7p2

Summary of Contents for Toshiba ik-tf7p2

  • Page 1: Camera Control Unit

    INSTRUCTION MANUAL 3 CCD COLOR CAMERA IK-TF7P2 For Customer Use Enter below the Serial No. w h i c h i s l o c a t e d o n t h e bottom of the cabinet. Retain this information for future ref- erence.
  • Page 2 SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
  • Page 3 5. Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party. 6. Notwithstanding the foregoing, Toshiba’s/TAIS liabilities shall not, in any circumstances, exceed the purchase price of the product.

  • Page 4: Table Of Contents

    Accordingly, [Toshiba/TAIS] disclaims any and all liability arising out of the use of the product in any critical applications.

  • Page 5: Cautions On Use And Installation

    8. INPUT OUTPUT SIGNAL SPECIFICATIONS 35 7. 5 Partial Read ..........32 ( 1 ) Partial Scanning OFF 9. CCD OUTPUT WAVEFORM TIMING CHART 36 (All pixels scanning) ........32 10. BEFORE MAKING A SERVICE CALL ...37 ( 2 ) Partial Scanning ON .......32 11.

  • Page 6: Names And Functions

    NAMES AND FUNCTIONS Prism faceplate DC IN 12V terminal DISP button MENU UP button (AWB) DATA UP (AWB) button DISP MENU DATA DC IN 12V DATA DOWN button PAGE MENU DOWN button DIGITAL terminal PAGE button [ Front ] [ Rear ] [ Bottom ] ...

  • Page 7: Connection

    CONNECTION 4. 1 Standard Connection Lens Cable (not included) IK-TF7P2 DC IN 12V Frame grabber board, Monitor Less than 4 mm image process DC power equipment etc. supply 4. 2 Cautions on Connection • When connecting the camera cables, be sure to unplug the power source of the camera and the other equip- ment connected to it.

  • Page 8: How To Use "Emi Core

    4. 4 How to use “EMI core” An EMI core is shipped with this camera. When power is supplied to the DC IN terminal, this part must be used as in the drawing below. If not used, unnecessary radio waves may be emitted. DC IN terminal Power cable: 2 turns Camera...

  • Page 9: Operation

    OPERATION  Refer to the item “ 4. CONNECTION”, connect each component correctly.  Turn on the power source of the connected equipment and the camera. c Point the lens at the object, adjust the lens iris, focus, etc.. d Refer to the item “5.1 White Balance”, to do the adjustment. e Refer to the items “5.2 Gain, 7.

  • Page 10: Gain

     MANU (Manual white balance) • Set the MODE to MANU on the WHT BAL menu. (Refer to the item “7.2 (3) WHT BAL (white balance)”.) • Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc.

  • Page 11: Items Controlled By The Screen Display

    ITEMS CONTROLLED BY THE SCREEN DISPLAY Preset value Item Available selections (Factory setting) MODE MANU, SS, E. TRG, AUTO MANU E. TRG 1P SNR, 1P SR, PW SNR, PW SR, RR 1P SNR OFF, 1/100s, 1/250s, 1/500s, 1/1000s, 1/2000s, MANU speed 1/4000s, 1/10000s, 1/25000s, 1/50000s, 1/1000000s Partial read OFF 1H/796H~795H/796H, OFF, 2FRM~512FRM...

  • Page 12: Mode Setting By On Screen Display

    MODE SETTING BY ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized even if the power source is turned off, so it is unnecessary to set again when using the unit next time.

  • Page 13: Menus

    7. 2 Menus • Select the menu to change the setting by referring to the item “7.1 Using the Menus”. • When the [MENU UP], [MENU DOWN] buttons are pushed, the “ ” on the screen moves up and down. Move the “...

  • Page 14: (1. 1) Changing The Setting In

    (1. 1) Changing the setting in MANU mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • Shutter speed setting OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) MODE MANU 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s)

  • Page 15: Ss (Synchro. Scan) Mode

    (1. 2) Changing the setting in SS (synchro. scan) mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN SHUTTER • Shutter mode MANU, SS, E.TRG, AUTO MODE • Synchro. scanning setting OUT.P refer to the item "7.3 Synchro.

  • Page 16: E.trg Mode

    (1. 3) Changing the setting in E.TRG mode The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR. First move the “ ” to MODE and select E. TRG, then move the “ ” to E.TRG and select the desired E.TRG mode. ( 1.3.

  • Page 17: (1. 3. 2) Changing The Setting In

    ( 1.3. 2) Changing the setting in 1P SR mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • E.TRG mode 1P SNR, 1P SR, PW SNR, PW SR, RR MODE E.TRG E.TRG...

  • Page 18: Pw Snr Mode

    ( 1.3. 3) Changing the setting in PW SNR mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • E.TRG mode MODE E.TRG 1P SNR, 1P SR, PW SNR, PW SR, RR E.TRG PW SNR...

  • Page 19: Pw Sr Mode

    ( 1.3. 4) Changing the setting in PW SR mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • E.TRG mode MODE E.TRG 1P SNR, 1P SR, PW SNR, PW SR, RR E.TRG PW SR...

  • Page 20: (1. 4) Changing Each Setting In

    (1. 4) Changing each setting in AUTO mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • Auto shutter level adjustment MODE AUTO -100 ~ 100 LEVEL PEAK/AVE.

  • Page 21: ( 3 ) Wht Bal (White Balance)

    ( 3 ) WHT BAL (White balance) WHT BAL has two modes; AWB, MANU. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the two modes between AWB and MANU. (3. 1) Changing the setting in AWB (Automatic White Balance) mode Move up down Select the desired by pushing...

  • Page 22: 4 ) Process

    ( 4 ) PROCESS • Gamma Correction (GAMMA) Select either OFF or ON of Gamma Correction. • Master Pedestal (M. PED) Adjust the Pedestal level of each RGB. • R Pedestal (R. PED) Adjust the Pedestal level of Red. • B Pedestal (B. PED) Adjust the Pedestal level of Blue.

  • Page 23: 5 ) Shading

    ( 5 ) SHADING Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of the screen and at the corners. In this case, the shading correction can decrease the color shading. For the shading correction of the unit, you can select among MANU (Manual shading correction) or OFF (no shading correction) for V.SHAD.

  • Page 24: (5. 1) Changing V.shad. (Vertical Shading) Correction Mode

    (5. 1) Changing V.SHAD. (Vertical Shading) correction mode Move the “ ” to V.SHAD by pushing [MENU UP], [MENU DOWN] buttons. a Select the V.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons. a Note: The alignment value for vertical shading is fixed to “0” when selecting V.SHAD. OFF. MANU is not displayed in the menu.

  • Page 25: 6 ) Sync

    ( 6 ) SYNC When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync) automatically. Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN SYNC •...

  • Page 26: Synchro. Scan Operation

    7. 3 Synchro. Scan Operation The shutter speed can be set by the horizontal scanning period (1H) or by the number of frames. ( 1 ) Setting by 1H 1H/796H ~ 795H/796H stands for the setting by the 1H and the shutter speed can be set by the 1H (43.05 µs). When operating Partial Scanning or binning, the number’s listed below can be used for setting.

  • Page 27: Trg (External Trigger)

    7. 4 E. TRG (External trigger) Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are output. There are four modes: 1P SNR, 1P SR, PW SNR, PW SR. ( 1 ) 1P SNR (1 Pulse Trigger Sync Non Reset) Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are output.

  • Page 28: ( 2 ) 1P Sr (1 Pulse Trigger Sync Reset)

    ( 2 ) 1P SR (1 Pulse Trigger Sync Reset) Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is reset and frame images are output. (2. 1) 1 Pulse Trigger SYNC-RESET Picture Output Timing Negative polarity mode Trigger* Positive polarity mode...

  • Page 29: ( 3 ) Pw Snr (Pulse Width Trigger Sync-Non Reset)

    ( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET) The trigger input to CC1 of the DIGITAL terminal develops 1 frame images. (3. 1) Pulse Width Trigger SYNC-NON RESET Picture Output Timing Negative polarity mode Trigger* Positive polarity mode About 7 µs About 1 µs Exposure period*...

  • Page 30: ( 4 ) Pw Sr (Pulse Width Trigger Sync-Reset)

    ( 4 ) PW SR (Pulse width trigger SYNC-RESET) The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images. (4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Negative polarity mode Trigger* Positive polarity mode About 1 µs About 7 µs Exposure period*...

  • Page 31: ( 5 ) Rr (Reset Restart)

    ( 5 ) RR (Reset restart) Input of an external reset-restart signal (CC4 of the DIGITAL terminal: External VD input) permits one screen of information to be output at an arbitrary timing. (5. 1) Long Term Exposure When sufficient sensitivity is not obtained under normal operating conditions or capturing the trail of a moving object is desired, the reset-restart function allows high-sensitivity images by extending the exposure time.

  • Page 32: Partial Read

    7. 5 Partial Read ( 1 ) Partial Scanning OFF (All pixels scanning) In this mode, every pixels independent signal is output from the DIGITAL connector each 1/29.2s. Video interval image 1/29.2s (796H) ( 2 ) Partial Scanning ON In this mode, the pixel signal of the vertical center portion of the image is output from the DIGITAL connector. In the E.

  • Page 33: 3 ) When Partial Scanning Mode Is On

    ( 3 ) When Partial Scanning Mode is ON (Internal VD) FVAL LVAL, DVAL RGB data (video interval image) Blanking interval Video interval Blanking interval Total Video period Mode Total A Blanking interval B Video interval C Blanking interval D 40fps 580H 542H...

  • Page 34: External Sync

    7. 6 External Sync When using the unit with an external sync signal, input HD and VD to CC3 and CC4 of the DIGITAL terminal. When the external sync signal is input, the camera automatically switches its sync from the internal sync to the external sync.
  • Page 35 INPUT OUTPUT SIGNAL SPECIFICATIONS ( 1 ) HD Input Specifications ( 2 ) VD Input Specifications 2.0µs 5.0µs ( 3 ) Trigger Pulse Specifications More than 2 µs (Positive polarity mode) More than 2 µs (Negative polarity mode) ( 4 ) External HD/VD Input Phase Specifications External VD falling edge External HD...
  • Page 36 CCD OUTPUT WAVEFORM TIMING CHART ( 1 ) Horizontal Output Waveform Timing Chart One horizontal scan interval 1270 clk (43.05 µs) LVAL, DVAL 246 clk 33.9 ns (8.34µs) 40 clk 164 clk 29 clk 3 clk output signal 5 clk Optical black Horizontal transfer Dummy...

  • Page 37: Ccd Output Waveform Timing Chart 36 10. Before Making A Service Call

    BEFORE MAKING A SERVICE CALL Symptom Items to be checked No image • Is the power supplied correctly? • Is the lens iris adjusted correctly? • Are the cables connected correctly? • Is the shutter mode set correctly? • Is the image process equipment set correctly? Poor color •...

  • Page 38: External Appearance Diagram

    EXTERNAL APPEARANCE DIAGRAM Unit : mm [inch] [0.20] 2-M3 Depth 3 [3.07] [0.25] [0.47] [1.73] 19.2 2-M2 4-M3 Depth 3 [0.76] [0.20] [2.20] 4-M2 Depth 3 [0.98] [0.98] ∗ inch=mm/25.4...
  • Page 40 Limited Warranty – TOSHIBA CCD Camera The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited warranty with regard to this CCD Camera ("Product"). These limited warranties apply to the Original End-User ("You"). One (1) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of one (1) year from the date of purchase by the Original End-User.

Table of Contents