6 ) Sync; (6. 1) Adjusting Horizontal Phase; 7 ) Option; (7. 1) Changing Serial Communication Baud Rate - Toshiba ik-tf7p2 Instruction Manual

( 6 ) SYNC
When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync)
automatically.
Move up down
by pushing
MENU UP, DOWN
SYNC
MODE EXT
H PHASE 0
(6. 1) Adjusting horizontal phase
Move the " " to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
a
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
a
( 7 ) OPTION
(7. 1) Changing serial communication baud rate
Move the " " to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
a
Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
a
Move up down
by pushing
MENU UP, DOWN
OPTION
BAUD RATE
9600
( 8 ) Returning to factory settings
All the settings can be returned to the factory default status (preset status).
(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for
approx. 1 second.
Select the desired
value by pushing
DATA UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
• Sync system display
• H PHASE adjustment -100 to 100
• Serial baud rate setting 9600, 19200
Communication speed setting.
Set the speed to the baud rate setting
on the personal computer side.
25