(1. 3. 2) Changing The Setting In; Sr Mode; (1. 3. 3) Changing The Setting In; (1. 3. 4) Changing The Setting In - Toshiba ik-tf7p2 Instruction Manual

( 1.3. 2) Changing the setting in 1P SR mode
Move up down
by pushing
MENU UP, DOWN
SHUTTER
MODE
E.TRG
TRG.P
EXP.
OUT.P
<MODE = E.TRG E.TRG = 1P SR>
(a) Changing the polarity of the input trigger pulse setting
Move the " " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
a
Select either ,
a
(b) Changing 1P SR exposure time setting
Move the " " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.
a
Select the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
a
(c) Changing the partial scanning setting
Move the " " to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
a
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
a
Move " " to the current value by pushing [MENU UP], [MENU DOWN] buttons.
ca
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
da
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Select the desired
value by pushing
DATA UP, DOWN
E.TRG
1P SR
30ms
OFF
, by pushing [DATA UP], [DATA DOWN] buttons.
• Shutter mode MANU, SS, E.TRG, AUTO
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• Exposure time setting at 1P SNR and 1P SR
0.01 ms 0.02 ms
0.01 ms 0.02 ms
step step
• Partial scanning switch PART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
0.4 ms 1 ms 20 ms
0.1 ms 1 ms 2 ms
step step step
30 ms
17