Pw Snr Mode - Toshiba ik-tf7p2 Instruction Manual

( 1.3. 3) Changing the setting in PW SNR mode
Move up down
by pushing
MENU UP, DOWN
SHUTTER
MODE
E.TRG
TRG.P
OUT.P
<MODE = E.TRG E.TRG = PW SNR>
(a) Changing the polarity of the input trigger pulse setting
Move the " " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
a
Select either ,
a
(b) Changing the partial scanning setting
Move the " " to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
a
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
a
Move " " to the current value by pushing [MENU UP], [MENU DOWN] buttons.
ca
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
da
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras
become: fixed pattern noise, white pixels, etc.
18
Select the desired
value by pushing
DATA UP, DOWN
E.TRG
PW SNR
OFF
by pushing [DATA UP], [DATA DOWN] buttons.
• Shutter mode MANU, SS, E.TRG, AUTO
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at PW SNR and PW SR
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• Partial scanning switch PART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps