Dell 2135cn Service Manual page 690

Hide thumbs Also See for 2135cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Replacement 24 KIT FEED ROLL/SOL/CLUTCH (PL10.4.99)

1) Mate the holes of the SOLENOID FEED

MS with the two bosses of the printer,

secure the SOLENOID FEED MSI with the

one screw (silver, tap, 8mm).

2) Engage the connecter (P/J231) of the

SOLENOID FEED MSI, secure the relay

connector with the rib of the printer.

3) Route the harness of the SOLENOID

FEED MSI through the hooks of the

Note: When carrying out the work described next procedure, it is easier to put the D-cut surface

of the SHAFT ASSY FEED on the front.

Chapters

Table of Contents