Dell 2135cn Service Manual page 47

Error Message
Panel Message
016-318 Printer
Reseat Memory
Restart Printer
Contact Support
016-323 Printer
Restart Printer
Contact Support
If Message Returns
016-324 Printer
Restart Printer
Contact Support
If Message Returns
016-327 Printer
Restart Printer
Contact Support
If Message Returns
016-340 Printer
Restart Printer
Contact Support
If Message Returns
016-344 Printer
Restart Printer
Contact Support
If Message Returns
016-345 Printer
Restart Printer
Contact Support
If Message Returns
Version 4.1 2009.04.03
Status Window
Multifunction printer error.
Remove the unsupported
additional memory module.
Contact customer support if
this failure is repeated.
016-318
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-323
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-324
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-327
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-340
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-344
Multifunction printer error.
Turn off the multifunction
printer, and turn it on again.
Contact customer support if
this failure is repeated.
016-345
Error Contents
<ESS DIMM Slot RAM Power On
Initializing Fail >
The error is detected by DIMM slot RAM
power on initial check.
<ESS NVRAM1 W/R Check Fail>
The failure is detected by NVRAM 1 W/R
check during initialization.
<ESS NVRAM2 W/R Check Fail>
The failure is detected by NVRAM 2 W/R
check during initialization.
<ESS NVRAM SIZE And ID Check Fail>
The error is detected by consistency
check between NVRAM size required by
the system and its actual size, and by
consistency check of ID recorded when
turning ON the power.
<CONT AIO Network Communication
Fail>
Communication error between Network
Module and System Control Module is
detected.
<CONT AIO Network MAC Address
Checksum Error>
Checksum error in Network MAC address
is detected.
MAC: Media Access Control
<CONT AIO Network Ethernet BIST
parity/ RAM R/W Error>
The error is detected by Network Ethernet
parity RAM R/W check.
1 - 19
Chapter 1 Troubleshooting
FIP to be
referred
Flows 19
FIP-1. 19
Flows 18
FIP-1. 18
Flows 18
FIP-1. 18
Flows 18
FIP-1. 18
Flows 18-1
FIP-1. 18
Flows 18
FIP-1. 18
Flows 18
FIP-1. 18