Fip-1; Erase Flash Err. 016-392 / Write Flash Err. 016-393 / Verify Error 016-394 ....................... 1 - Dell 2135cn Service Manual

FIP-1. 18 016-300/016-301/016-302/016-310/016-313/016-315/016-317/016-323/016-324/

016-327/016-340/016-344/016-345/016-346/016-347/117-365/131-397/131-398/
131-399 Restart Printer / Erase Flash Err. 016-392 / Write Flash Err. 016-393 /
Verify Error 016-394
Step
Possible causative parts:
PWBA CONT AIO (PL10.6.6)
Checking the error code.
1
Error code is 016-317 or 016-340?
Download the latest version of the firmware from the Dell
support website, and update the firmware with "F/W
2 Download DL Mode". (Refer to Refernce_1.)
Does the error still occur when the power is turned off and
on?
Check whether the version of the firmware is the latest,
referring to the Printer Information via the Tool Box.
Checked by [Printer Information] of the [Printer Settings
3 Report] tab in Tool Box.
For the latest version information, refer to the Dell Support
Web Site.
Is the firmware the latest version?
Reference_1:
1. Make sure that the printer is connected to the computer via USB port (remove the network cable).
Then, try downloading as follows:
1) Power on the printer while pressing the <X Cancel> and < > buttons.
2) The printer goes into the Download Mode with a message "Download Mode Ready". Then,
activate firmware update tool and follow the instruction displayed.
While the firmware download is being executed, the printer displays a message
"Writing...USB F/W" and the computer displays a progress bar and may be
restarted during the downloading process. Never power off the printer or the
computer until the downloading process completes, and never interrupt the
downloading process.
Version 4.2 2009.08.25
Check
1 - 245
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. Go to step 3.
Replace the
PWBA CONT
End of work.
AIO. (Removal 24/
Replacement 36.)
Download the
Replace the
latest version of
PWBA CONT
the firmware from
AIO. (Removal 24/
the Dell Support
Replacement 36.)
Web Site.
No