FIP-The message "Printing..." appears on the Control Panel and the printer freezes during
fax reception.
Step
Possible causative parts
PWBA CONT AIO (PL10.6.6)
Checking Discard Size under Fax Setting
Is the Discard Size option set to ON?
1
On the Control Panel, open [Admin Menu] > [Fax Settings] >
[Discard Size].
Disabling Discard Size
On the Control Panel, open [Admin Menu] > [Fax Settings] >
2
[Discard Size], and select "Off".
Power off the printer and then on. Does the problem
persist?
Replacing PWBA CONT AIO
Try replacing the PWBA CONT AIO.
3
Power off the printer and then on. Does the problem
persist?
Version 4.1 2009.04.10
Check
1 - 429
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2.
Go to step 3.
Go to step 3.
End of work.
Replace the
End of work.
Printer.
No