Sv8100/Sv8300 Terminals - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
term
The D Handset Cordless Terminal is a stand-alone telephone with a direct connection to one digital
port on the CD-8DLCA or CD-16DLCA blades.
term
The D Handset Cordless Terminal has the following features:
40 separate Channels for Base unit communication
3-Channel semi-auto scan (MCA)
900 MHz Analog FM spectrum with Voice Scramble
MW Lamp for incoming call and voice mail message notification
30~100 foot operating range between Handset and Base unit without obstructions or other
environmental factors
AutoTalk™ Feature
AutoTalk is a trademark of Uniden America Corp.
Any Key Answer
LED Low Battery Warning
Talk (Talk), Transfer (Trf), Mute (Mute), Channel (Ch), Volume (Vol), and Ringer On/Off keys
4-hour Talk Time
40-hour Standby Time
Conditions
The Handset Cordless terminal provides 40 different channels for communication with the
Base Unit.
When communication is stopped for about 30 seconds during handset conversation, the
Handset Cordless terminal automatically searches for a clear channel. An error tone rings
the handset when it is not on the Base Unit.
When reception becomes garbled or static occurs during conversation, channels can be
changed manually. Press the Ch key to activate the 3-channel automatic scan (MCA).
When channel change fails, an error tone is generated and the channel does not change.
While the channel is changing, the Talk/Batt.low LED flashes (On 100 msec., Off 100 msec.).
When a communication path is established between the Handset Cordless terminal and the
Base Unit, the Talk/Batt.low LED is on and dial tone is generated.
When a communication path cannot be established in five seconds, an error tone is
generated and the Handset returns to standby.
A pencil eraser or contact cleaner should be used monthly to clean the battery contacts on
the Handset and Base Unit to maintain stable charge.
SV8100 Features and Specifications Manual

SV8100/SV8300 Terminals

Issue 1.0
2 - 1043