Yamaha MT-01 T 2005 Service Manual page 352

Diag-
nostic
code
No.
11 Engine temperature
12 Muffler cooling fan
temperature
20 Sidestand switch
• Stand retracted
• Stand extended
21 Neutral switch
• Neutral
• In gear
53 EXUP servo motor
60 EEPROM fault code
display
• No history
• History exists
61 Malfunction history code
display
• No history
• History exists
62 Malfunction history code
erasure
• No history
• History exists
Item
Displays the engine
temperature.
Displays the muffler cooling
fan temperature.
ON
OFF
ON
OFF
Displays the operating angle.
Engine trouble warning light
comes on twice: once when
the EXUP valve is closing
and once when it is opening.
00
01 or 02 (Cylinder fault code)
• (If both cylinders are
defective, the display
alternates every two
seconds.)
00
Fault codes 12-63
• (If more than one code
number is detected, the
display alternates every two
seconds to show all the
detected code numbers.
When all code numbers are
shown, the display repeats
the same process.)
0
Up to 28 fault codes
FUEL INJECTION SYSTEM
Meter display
7-37
Checking method
Compare the actually
measured engine
temperature with the meter
display value.
Compare the actually
measured muffler cooling
fan temperature with the
meter display value.
Set ON/OFF the Sidestand
switch. (with the
transmission in gear.)
Shift the transmission.
—
—
—
—
To erase the history, set the
engine stop switch to " ".