Adjusting The Rear Shock Absorber Assembly - Yamaha MT-01 T 2005 Service Manual

M MMM M MMM M M MMM M
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a" (turn in)
Rebound damping is increased
(suspension is harder).
Direction "b" (turn out)
Rebound damping is decreased
(suspension is softer).
Rebound damping adjusting
positions
Minimum
17 click(s) out*
Standard
15 click(s) out*
Maximum
1 click(s) out*
* With the adjusting screw fully turned in
a
L LLL L LLL L L LLL L
Compression damping
ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Compression damping
M MMM M MMM M M MMM M
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a" (turn in)
Compression damping is increased
(suspension is harder).
Direction "b" (turn out)
Compression damping is decreased
(suspension is softer).
M MMM M M MMM M M MMM M
1
b
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
MMM
Compression damping adjusting
positions
* With the adjusting screw fully turned in
L LLL L LLL L
EAS21620
ADJUSTING THE REAR SHOCK ABSORBER
ASSEMBLY
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
Spring preload
LLL ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Spring preload
NOTE:
Adjust the spring preload with the special
wrench "1".
MMM
M MMM M MMM M
a. Loosen the locknut "2".
b. Turn the adjusting nut "3" in direction "a" or
"b".
Direction "a"
Spring preload is increased
(suspension is harder).
Direction "b"
Spring preload is decreased
(suspension is softer).
3-28
Minimum
16 click(s) out*
Standard
7 click(s) out*
Maximum
1 click(s) out*
a
b
1
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
CHASSIS
L LLL L LLL
M MMM M MMM