Table of Contents
Advertisement
Manuals: Link to microHAM manuals located on your system
Setup Guides: Link to software configuration guides for many common applications.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation. Note: requires an internet
connections.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor
Update Router: Download and install the most recent version of Rotuer.
About: Shows the Router's internal version number
There are twelve (12) tabs for configuring MK2R. Each tab controls part of MK2R's functions. Except for
CW Messages, FSK Messages and Functions tabs, any change is applied immediately to MK2R.
Ports: assign virtual ports to the MK2R for use by applications
Audio Switching: configures microphone and sound card audio routing based on operator preference,
application sound card handling and operating mode
Audio Mixer: sets sound card or CODEC levels.
NOTE: The Audio Mixer is not available under Windows Vista. The application program
must control the sound card directly.
PTT: configures T/R keying, keying sequencer and foot switch functions
CW/WinKey: configures the internal CW keyer
CW Messages: enter/store internal CW message memories
FSK Messages: enter/store internal FSK message memories
DVK: configure and control the level of Router's voice keyer
Keyboard: configure operation of PS/2 keyboard or keypad
SO2R: select source of focus control and other SO2R operating features.
ACC: configure the accessory port
Functions: configure headphone switching, audio routing for recording and digital operation.
microHAM © 2008 All rights reserved
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html
DEVICE CONFIGURATION TABS
25
Advertisement
Table of Contents
