Menu: Preset - microHAM MK2R User Manual

Hide thumbs Also See for MK2R:
Table of Contents

Advertisement

TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon.
also restore Router by double-clicking on the Router icon on the desktop or in the Programs menu.
Exit: Clicking on this item will terminate Router.
NOTE: when Router is terminated the virtual ports will be closed and application software will be unable to
communicate with MK2R and the radio.
The requirements of each application (logging, control and digital
mode programs) are different. Every one handles radio control,
CW, FSK, PTT, and the sound card its own way. In some cases,
what works for one application may not work properly with another.
To get maximum performance from MK2R, the user should create
customized settings for each application used.
For easy switching among applications, Router supports up to 12
user definable Presets. Different configurations can be stored in
these presets and recalled almost instantly simply by clicking on the
preset button.
Each preset contains the settings for all devices connected to, and
controlled by, Router. For example, if Router controls a
microKEYER, a CW Keyer and a USB Interface, each preset
remembers the settings for all devices including the assignment of
COM ports and the contents of all sub-tabs except the FSK/CW
Messages and DVK tabs.
NOTE: Presets are not available until they have been saved by the
user using Preset | Save as. For setup instructions for various
loggers refer to Setup Guide documents available in Router Help
menu (Use Help | Download Documents first if Help | Setup Guides
are not available or incomplete).
There are three ways to apply a preset once it is created:
1. Click on Preset and select tfrom the pull-down menu.
2. Click on a preset button. To have buttons visible in Router, Preset | Show Buttons must be
checked. When the settings from a preset are applied, a green light located in the preset button is
lit. This green light is on ONLY when all settings in Router are same as those stored in the
preset.
microHAM © 2008 All rights reserved
PRESET MENU
22
You can

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mk2r+

Table of Contents