M Aintenance A Nd C Leaning; Lint F Ilter; Sensor - Blomberg DV 16540 NBL00 Owner's Manual & Installation Instructions

6
M aintenance a nd c leaning
Lint f ilter
Lint and fibers released from the laundry in to
the air during the drying cycle are collected in
C F
ibres and lint are formed during wearing
and washing.
A
Always clean the filter after each drying
cycle.
To clean the Filter;
1. Open loading door.
open the filter.
3. Clean lint, fiber, and by hand or with a soft
piece of cloth.
4. Close the filter and put it back in place.
C
a vacuum cleaner.
C
Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
Sensor
There are humidity sensors in your machine
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been
done recently.
3. Wipe the metal sensors with a soft cloth
dampened with vinegar and dry the sensors
afterwards.
C
Clean the metal sensors at regular
A
Never use solvents, cleaning agents
or similar substances when cleaning
as these might cause fire and/or an
22 - EN