Auxiliary Function; Warning Indicators; Time Delay - Blomberg TROCKNER TKF 7330 A User Manual

Auxiliary function

Cancel Audio Warning
Your machine will send out an audio
warning when the program comes to
an end. If you do not want to hear this
buzzing, you need to press the "Cancel
Audio Warning" button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the program comes to an end.
C
You can select this function either
before or after the program starts.

Warning indicators

C
Warning indicators may differ
according to the model of your
machine.
Timer programming
A warning LED will light up when timer is
programmed.
Child-proof lock
A warning LED will light up as long as the
child-proof lock remains activated.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the program finishes.
C
If the filter cleaning warning lights
up continuously, please refer to,
"Solution suggestions for problems".
Tank full
A warning LED will light up at the end
of the program or when the tank is full
with water. The machine stops operating
when this warning LED lights up during a
program running. To enable the machine
restart, drain the water in the water tank.
Press "Start/Pause/Cancel" button to
start the program after you have emptied
the water tank. The warning LED goes off
and the program resumes operating.
Cleaning the condenser.
It will light up periodically after maximum
5 drying cycles for the purpose of
reminding.
In this case and after drying, clean as
explained in the section "Maintenance
and Cleaning".

Time delay

With the "Time delay" function you can
delay the program start up to 19 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying program and select
the auxiliary functions if required.
3. Press the "Time delay" buttons to
adjust the desired time.
4. Press "Start/Pause/Cancel" button.
The time delay function will start to
countdown.
C
Additional laundry may be loaded
during the time delay period.
5. At the end of countdown process,
":" will light up continuously and the
relevant program follow-up light will
light up according to the selected
program.
C
During drying process, the display
shows the estimated time remaining
for the program to finish. The
estimated time displayed on the
screen at the beginning of the drying
process has been calculated on the
basis of an 800 rpm spin speed rate
to dry a maximum load capacity in
the washing machine.
C
If the loaded laundry amount is less
than the calculated laundry amount
or if drying has been performed at
higher spin speed, the remaining
time may be less than the time that
appears on the display.
C
Incase the laundry is spun at a lower
spin rate than the calculated one and
if "Filter Cleaning" or "Condenser
Cleaning" processes are not carried
out, the remaining time may be longer
than the time shown on the display.
C
Dryness level of the laundry is
14 - EN