Cub Cadet RZT-S Professional Shop Manual page 56

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
RZT-S
13. Install the speed cam alignment bar.
See Figure 5.6.
14. Install the control link alignment fixture in the slots of
the control links. See Figure 5.7.
NOTE: Make sure the bolts in the cam slots are
aligned with the speed cam timing marks.
15. Thread the ball joints up or down the length of the
control links to align them with the holes in the
transmission control arms. See Figure 5.8.
16. Attach the control links to the transmission control
arms.
17. Tighten the control link jam nuts.
18. Remove all of the alignment pins and alignment fix-
tures.
19. Install the floor pan, following the procedures
described in Chapter 3: Body.
20. Test drive the mower in a safe area before returning
it to service.
NOTE: Do not put a mower back into service if it
does not react properly to control inputs.
50
www.mymowerparts.com
Timing mark
Speed cam alignment bar
Figure 5.6
Control link alignment fixture
Figure 5.7
Figure 5.8
Timing mark
Control arm