Clean The Engine; Transmissions - Cub Cadet RZT-S Professional Shop Manual

Zero-turn mower
Hide thumbs Also See for RZT-S:
Table of Contents

Advertisement

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
3.
Carefully slide the fuel lines off of the filter. If there are pieces of rubber on the barbs of the fuel filter, replace
the affected fuel line.
IMPORTANT: The RZT-S uses low permeation fuel line to meet EPA guidelines. When replacing the fuel
lines, they must be replaced with the same type of low permeation fuel line.
4.
Install the new filter by following the above steps in reverse order.
5.
Test run the engine and check for leaks before returning the mower to service.

Clean the engine

Obstructed
air filter
Figure 8.10

Transmissions

The RZT-S is equipped with two Hydro-Gear EZT transmissions.
The maintenance procedures for the transmissions are located in the Hydro-Gear manuals. The Hydro-Gear
shop manual for the EZT transmissions is form number BLN-52622.
Mouse nest
www.mymowerparts.com
Air cooled engines cool better if they are clean. Check
for critter nesting or signs of nesting especially after dor-
mant season storage. See Figure 8.10.
Maintenance Intervals
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents