Spindle Overhaul - Cub Cadet RZT-S Professional Shop Manual

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

Spindle overhaul

Pulley
Washer
Shaft
Spacer
Figure 7.19
Drift
Figure 7.20
Housing
Spacer
Upper bearing
Figure 7.21
Nut
www.mymowerparts.com
To rebuild a spindle:
1. Remove the spindle by following the procedures
described in the spindle removal section of this chap-
ter.
2. Remove the spindle pulley, spacer and washer using
an impact wrench and a 15/16" socket.
3. Slide the spindle shaft and pulley out of the spindle
housing. See Figure 7.19.
4. Remove the upper bearing.
NOTE: The spindle bearings are sealed ball bearings. The
bearing should have a slip fit in the housing. If the
bearing does not slide out of the housing, it can be
driven out of the housing using a drift or a punch.
See Figure 7.20.
5. Remove the spacer. See Figure 7.21.
Decks and Lift Shaft
113