Table of Contents
Advertisement
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
RZT-S
Drive belt
To remove/replace the drive belt:
NOTE: If a drive belt fails prematurely, find and cor-
rect the cause of the failure.
1.
Remove the deck as described in Chapter 7: Cut-
ting Decks and Lift Shaft.
2.
Lift and safely support the rear of the mower.
3.
Remove the battery. See Figure 4.16.
4.
Remove the nuts that hold the right belt guard to the
frame using a 7/16" wrench. See Figure 4.17.
5.
Remove the right belt guard.
6.
Remove the nuts that hold the left belt guard to the
frame using a 7/16" wrench.
NOTE: The front nut on the left belt guide will be
inside the seat box, under the harness.
7.
Remove the left belt guard.
30
www.mymowerparts.com
Battery
Figure 4.16
Nuts
Figure 4.17
Nuts
Figure 4.18
- Quick Links:
- Drive Belt
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RZT-S and is the answer not in the manual?
Questions and answers
Hello, I have a cub cadet rzt sx that shut down due to lack of fuel. It doesn't,have an inline filter as seen in the manual. where is the filter located