Table of Contents
Advertisement
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
RZT-S
To replace the 46" deck belt:
1.
Remove the deck as described at the beginning of
this chapter.
NOTE: Removal of the deck is not necessary, but
makes it easier to route the belt around the
spindles.
2.
Loosen the idler pulleys enough to allow the belt to
slip between them and the belt keepers.
3.
Slide the belt off of the pulleys.
4.
Route the new belt around the pulleys.
See Figure 7.8.
5.
Tighten the idler pulleys.
6.
Install the deck as describe at the beginning of this
chapter.
7.
Test run the mower before returning to service.
To replace the 50" deck belt:
1.
Remove the deck as described at the beginning of
this chapter.
NOTE: Removal of the deck is not necessary, but
makes it easier to route the belt around the
spindles.
2.
Loosen the two rear idler pulleys enough to allow
the belt to slip between them and the belt keepers.
3.
Slide the belt off of the pulleys.
4.
Route the new belt around the pulleys.
See Figure 7.9.
5.
Tighten the idler pulleys.
6.
Install the deck as described at the beginning of this
chapter.
7.
Test run the mower before returning to service.
108
www.mymowerparts.com
Figure 7.8
Figure 7.9
- Quick Links:
- Drive Belt
Hide quick links:
Advertisement
Table of Contents
