For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
RZT-S
Control cable adjustment
To adjust the control cable:
1.
Move the throttle lever to the detent between the full
throttle and the choke position.
2.
Loosen the clamp that holds the control cable jacket
in position. See Figure 2.17.
3.
Slide the cable jacket until the speed control lever
makes contact with the choke lever.
4.
Tighten the control cable jacket.
5.
Move the throttle lever to the choke position.
6.
Verify that the choke is fully closed.
7.
Test run the mower in a safe area before returning it
to service.
14
www.mymowerparts.com
Choke lever
Contact point
Speed control lever
Figure 2.17
Control cable clamp