Table of Contents
Advertisement
Table 3
Table 3 Appliance Status LEDs
Status LED
Power
Status
Fault
For information about the built-in Ethernet interface LEDs, see
page 12.
Site Requirements
Before you install a Check Point IP150 appliance, ensure that your computer room or wiring
closet conforms to the environmental specifications listed in
Specifications."
Product Disposal
Check Point IP150 Security Platform Installation Guide
describes the Status LEDs and each status indicator or condition that might display.
Status Indicator (Color)
None (off)
Blue
None (off)
Yellow (steady)
Yellow (blinking)
None (off)
Red (steady)
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local city office or your
household waste disposal service.
Description
Power off
Power on
Normal
Initial boot flash activity
or
Internal voltage problem
Temperature fault
Normal
Initial boot flash activity
or
One or more fans are defective.
"Built-in Ethernet Ports"
Appendix A, "Technical
Site Requirements
on
15
Advertisement
Table of Contents
