Alarm Signal Standard - Samsung SDM-090P User Manual

SDM-090(P)
Digital Multiplexer

5.Alarm signal standard

You can view record output when alarm occurs during record.
For example, if record status have the following conditions:
¥ Currently perform record in the TLV mode on the time lapse VCR.
¥ Set the "REC TYPE" to "NOR" in the "5. ALARM SET" of the "program mode".
The record output until release after the alarm occurs is as follows:
VCR TRIG
Record output
TLV operation
operation
ALARM OUTPUT
Output
ALARM RESET
Output
TRIG override
NOR operation
Alarm occurrence
7-2
TLV
More than 150ms
Alarm reset