Table of Contents
Advertisement
SDM-090(P)
Digital Multiplexer
- The following is displayed if pressing the "ENTER" button with the blinking position
placed at the "SPOT OUT...":
[SPOT OUT]
CH1 : 02
CH2 : 00
CH3 : 00
CH4 : 00
CH5 : 00
CH6 : 00
CH7 : 00
CH8 : 00
CH9 : 00
ALARM S/W TIME : 02
¥ You can set the sequence time of SPOT output.
¥ The blinking indication moves if pressing " ", " " button.
¥ The setting value is changed if pressing "
CH1~CH9 : 0 to 30 seconds.
Alarm S/W TIME : 01 to 30 seconds.
¥ The changed setting value is stored if pressing the "SET" button and you can return to
the "MON OUT SET" menu.
The channel of LOSS or " 0 " of sequence time will be skipped in the SPOT output
sequence.
SPOT OUTPUT on alarm
When the alarm is activated, only the alarmed channel will be output.
On single alarm : output only the alarmed channel.
On multiple alarms : output alarmed channels in turn at intervals of set ALARM
S/W TIME.
(Even the sequence time of the alarmed channel is set as " 0 " then will be SPOT
output.)
", "
" button.
5-5
Advertisement
Table of Contents
