SDM-090(P)
Digital Multiplexer
3. Connecting to TIME LAPSE VCR
When connecting the unit to the TIME LAPSE VCR, set "TLV" in "REC TYPE"
after selecting "1.REC OUT SET" of SETUP MENU.
1. Connect a S-JACK cable to the VTI terminal on the Unit's Rear Panel and to
the REC TRIG OUT terminal on the VCR.
2. Connect a S-JACK cable to the 'G' terminal on the Unit's Rear Panel and to
the 'G' terminal on the VCR.
3. Connect a cable to the VCR IN terminal on the Unit's Rear Panel and to the
VCR OUT terminal on the VCR. Likewise, connect a cable to the VCR IN
terminal on the Unit's Rear Panel and to the VCR OUT terminal on the VCR.
CAUTIONS
Depending on the kinds of TIME LAPSE VCR, the name of REC TRIGGER OUT
terminal may be different, so be sure to connect after checking its name.
TIME LAPSE VCR
TRIGGER
GND
OUT
OUT
MONITOR
IN
IN
3-3
1
2
3
4
5
6
7
8
9