Table of Contents
Advertisement
SDM-090(P)
Digital Multiplexer
¥ Place the unit on a flat surface and
maintain temperature properly. Allow 15
cm of clearance between the rear panel
and the wall.
¥ Be careful not to drop any conductive
materials into the hole for ventilation
¥ When replacing built-in fuse, be sure
to turn the power off, and unplug
the unit.
¥ Avoid locating the unit where direct sunlight
will fall, and maintain it cool. Keep tools
and equipment away from people so that
they would not be hurt.
¥ Power Outlet should be grounded
2P(or 3P)Type.
15Cm
2-3
Advertisement
Table of Contents
