SDM-090(P)
Digital Multiplexer
2. Connecting to S-VHS VCR and S-VHS MONITOR
When playing back TAPE by connecting to S-VHS, select "Y/C" in "PB IN" Mode,
once you in "2.MON OUT SET" Mode in SETUP Menu.
1. Connect a S-JACK cable to the VCR IN 4-pin terminal on the Unit's Rear
Panel and to the OUT terminal on the VCR.
2. Connect a S-JACK cable to the VCR OUT 4-pin terminal on the Unit's Rear
Panel and to the IN terminal on the VCR.
3. Connect a S-JACK cable to the MON OUT 4-pin terminal on the Unit's Rear
Panel and to the IN terminal on the Monitor.
MONITOR
S-VHS VCR
OUT
IN
IN
3-2