When Desiring To See The Stop Screen - Samsung SDM-090P User Manual

SDM-090(P)
Digital Multiplexer

When desiring to see the stop screen

The monitor screen (full screen and division) may be seen with a temporary
stop.
A desired screen may be temporarily stopped selectively in the division screen
indication mode.
1. FREEZE setting of FULL screen
The LED turns on and monitor image stops and "FREEZE" character is indicated
on the screen if pressing the "FREEZE" button in the FULL screen mode. The
LED turns off and the stop mode is released if pressing the "FREEZE" button
once again.
2. FREEZE setting of division screen
The LED blinks if pressing the "FREEZE" button. The selected screen stops if
selecting a channel to freeze, and "F" character is displayed. The selected
channel is released if pressing the relevant channel again and stop of all
channels if pressing the "FREEZE" button.
01/05/01 12:30:26
FREEZE
CH1
FULL screen
The "FREEZE" button does not operate in the following cases:
- In setting division screen mode
- In setting of program mode
- In displaying ALARM/LOSS LIST on screen
01/05/01 12:30:26
F
CH1
Flash
CH3
4-division screen
4-5
CH2
F
CH4