Mpx Display Settings; Split/Sequence; Split4 Screen Setting - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

<MPX DISPLAY SETTINGS> (continued)

MPX DISPLAY SETTINGS

Multiplexer setting of the <OUTPUT A> screen for the moni-
tor video and multiplexer setting of the <OUTPUT B> screen
for the live monitor video can be set respectively.

SPLIT/SEQUENCE

SPLIT/SEQUENCE allows selection of display modes.
Setting ( default : "ALL" )
"ALL" : Displays all split screens of 4, 9, and 16.
"SHORT" : Displays selected SPLIT9 sequential,
SPLIT4 sequential, single screen sequential and
SPLIT16.
When "SHORT" is selected, only the whole sin-
gle screen or SPLIT16 screen selection can be used
to view playback.
1. Press the SET UP button
<MPX DISPLAY SETTINGS> screen and turn the SHUTTLE
ring clockwise.
• The <MPX DISPLAY SETTINGS> screen appears.
Select "ON" in the "OUTPUT B ON/OFF" to dis-
play the live monitor video of OUTPUT B on the
screen. When the setting is kept "OFF" in the "OUT-
PUT B ON/OFF", the live monitor video of OUTPUT
B is not displayed.
2. Turn the JOG dial to select "OUTPUT A" or "OUTPUT B",
and turn the SHUTTLE ring clockwise.
• The <OUTPUT A> screen or the <OUTPUT B> screen
appears.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
38
<SETTINGS> Select the
When set the multiplexer setting of the <OUT-
PUT B> screen the same as the setting of the <OUT-
PUT A> screen, turn the JOG dial to move the cur-
sor to "SAME AS OUTPUT A" on the <OUTPUT B>
screen and turn the SHUTTLE ring clockwise.
3. Turn the JOG dial to display the desired setting, and turn
the SHUTTLE ring clockwise.
• The setting is confirmed, and flashing stops.

SPLIT4 SCREEN SETTING

For the SPLIT4 SCREEN SETTING, 4 types of SPLIT4
screen types (a, b, c and d) can be set.
1. Press the SET UP button
"OUTPUT A" ("OUTPUT B") in the <MPX DISPLAY
SETTINGS> screen and turn the SHUTTLE ring clockwise.
• The <OUTPUT A> (<OUTPUT B>) screen appears.
2. Turn the JOG dial to select "SPLIT4 SCREEN SETTING"
and turn the SHUTTLE ring clockwise.
• The <SPLIT4 SCREEN SETTING> screen appears.
1 2
3
4
9 10
12
11
3. Turn the JOG dial to select the split display to set (a, b, c or
d) and turn the SHUTTLE ring clockwise.
• The (most upper left) camera number reverses in color.
4. Turn the JOG dial to move to the camera number with the
reversed display and turn the SHUTTLE ring clockwise.
• The background of the camera number turns red and
flashes.
5. Turn the JOG dial to display the camera number to set and
turn the SHUTTLE ring.
• Flashing stops.
The same camera number can be set multiple
times on the split screen display. When multiple set-
tings with the same camera number have been
made, the playback image is displayed at the cam-
era location with the lowest number.
6. Repeat steps 4 and 5 to set the desired camera number.
7. When completed with setting, turn the SHUTTLE ring
counterclockwise.
• Setting is confirmed and the cursor appears.
8. To set other split screen displays, repeat steps 3 ~ 7.
The <SPLIT4 SCREEN SETTING> screen can-
not be exited when camera number is flashing.
<SETTINGS> Select
5 6
7 8
d
13 14
15 16