Copying From Unit To Videotape - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

When "DIRECTION", and "OVERWRITE" on
"MODE", all data on the Compact Flash Card re-
gardless of menu division is overwritten.
5. Display the desired setting in "TRANSFER PERIOD" and
confirm.
Setting ( default : "START•END" )
"START•END" : Sets the recording start/end date/
time.
"START" : Sets the recording start date/time.
"LATEST DATA" : Starts copying from the end point
according to the available memory in the COPY de-
vice.
6. Set the desired copy (restore) start date and time to "START"
and confirm.
7. (When setting "START•END" in step 5 • • • )
Set the desired copy (restore) end date and time to "END"
and confirm.
8. Select "EXECUTE" and turn the SHUTTLE ring clockwise.
• The copy (restore) operation is executed.
• If the copy (restore) operation does not start, turn the
SHUTTLE ring counterclockwise or press the COPY button.
The "COPY/NO MEDIA" warning is displayed
when executing COPY or RESTORE without a
Compact Flash Card inserted in the slot, no inserted
DDS, RDD media.
If the copy range exceeds the available ca-
pacity of the Compact Flash Card, DDS media
or RDD media, "COPY/SIZE/DATA ERROR"
warning will appear on the screen when copying
( see pages 92, 93). In this case, set again
using narrower copy range or insert a Card, DDS
media or RDD media with larger capacity.
If a data with no date is included in the copy
range, "COPY/SIZE/DATA ERROR" warning will ap-
pear on the screen.
When there is no data to restore in the Com-
pact Flash Card, DDS media or RDD media, "REST/
SIZE/DATA ERROR" warning will appear on the
screen when restoring.
A "REST/MEDIA ERROR" error is displayed
when executing RESTORE from a non-FSM2 Com-
pact Flash Card.
For usable Compact Flash Card, check with your
dealer of purchase.
When copy is performed during record, an image
may not be recorded at the time of a copy start and
an end. Be careful.
For the recordable time when copying to a Com-
pact Flash Card,
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
see page 89.
The image data is administrated in 1MB unit.
Therefore the data is copied in 1MB unit included
the designated range when copy.

Copying from unit to videotape

Data can be copied even when the unit is recording. For
recording operations, see the instruction manual accom-
panying the analog video cassette recorder.
DIGITAL RECORDER DX - TL 2500
SPLIT/
SEQUENCE
ZOOM
OUTPUT B TIMER PRE ALARM
0
POWER TIMER VIDEO OUT AUDIO OUT
To AUDIO OUT
To VIDEO OUT
terminal terminal
AUDIO CORD
VIDEO CORD
(commercially
(commercially
available cable,
available cable)
if necessary)
To AUDIO IN
To VIDEO IN
terminal
terminal
ANALOGUE VIDEO CASSETTE RECORDER
1. [Analogue video cassette recorder] Prepare the unit for
recording.
• First, set the input source to the external input connecting
this unit.
2. [This unit] Press the SPLIT/SEQUENCE button to select
the screen type to play back (
• Single screen, SPLIT4 (a, b, c and d) screen, SPLIT9 (a, b)
screen and SPLIT16 screen can be selected.
It is also possible to copy the video of each cam-
era in order using single screen sequential playback
( see "SEQUENTIAL PLAY", page 50).
3. [This unit] Use the search function to move to the beginning
of the video to copy ( see "START/END SEARCH", page
75).
4. [Analogue video cassette recorder] Start recording.
5. [This unit] Press the PLAY button to start playback.
6. To stop copying, press the STOP button of this unit. After
stopping playback, stop the recording on the analogue video
cassette recorder.
Only video recorded of camera number displayed
on the screen can be copied to videotape.
M-DET EMERGENCY ACCESS
COMPACT FLASH
see page 37).
77