Warning Log List; Reset To Factory Settings - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

<INITIAL SET UP/INFORMATION> (continued)
When "LONG PRE-ALARM" has been set for "HDD
SETTING", the <HDD INFORMATION> menu becomes
a 2-screen menu. To look at the start and stop times of
the ranges "MAIN", "SUB", and "LPA", confirm that the
cursor is on the left of "START/END INFORMATION"
and turn the SHUTTLE to the right.
"ID4" and "ID5" are appeared on the <HDD INFOR-
MATION> screen when "HDD" is selected on "ID4•ID5"
of the <INITIALIZATION> screen.
1-2 . (To check ARCHIVE/COPY device RECORD data • • • )
Press the SET UP button } <SETTINGS> } <INITIAL SET UP/
INFORMATION> } Select "ARCHIVE/COPY INFORMATION"
in the <INFORMATION/SERVICE> screen, and turn the
SHUTTLE ring clockwise.
• The <ARCHIVE/COPY INFORMATION> screen is displayed.
<ARCHIVE/COPY INFORMATION>
ID4:DDS
ID5:RDD
ID4:START
END
ID5:START
END
This setting is appeared when "ARCHIVE•COPY" is
selected on "ID4•ID5" of the <INITIALIZATION> screen.
1-3 . (To check RECORD data of the Compact Flash Card
inserted into the unit or whether MENU INFORMATION is
recorded • • • )
Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "CFC INFORMATION" in the
<INFORMATION/SERVICE> screen, and turn the SHUTTLE
ring clockwise.
• The <CFC INFORMATION> screen of the Compact Flash Card
inserted into the unit is displayed.
<CFC INFORMATION>
CFC
CAPACITY 128MB
START
END
MENU INFORMATION is appeared on the screen
when there is recorded MENU INFORMATION.
2.Turn the SHUTTLE ring counterclockwise or press the SET
UP button.

WARNING LOG LIST

The WARNING LOG LIST enables to check the number
of failure, date, time and type of failure, etc.
<INFORMATION/SERVICE>
HDD INFORMATION
ARCHIVE/COPY INFORMATION
CFC INFORMATION
>>WARNING LOG LIST

RESET TO FACTORY SETTINGS

MAIN HDD DATA CLEAR
SUB HDD DATA CLEAR
LPA HDD DATA CLEAR
CFC DATA CLEAR
ARCHIVE DATA CLEAR
COPY DATA CLEAR
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
58
(ARCHIVE)
(COPY)
---------- --:--:--
---------- --:--:--
---------- --:--:--
---------- --:--:--
---------- --:--:--
---------- --:--:--
(1/2)
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "WARNING LOG LIST" in the
<INFORMATION/SERVICE> screen. Turn the SHUTTLE ring
clockwise.
• The <WARNING LOG LIST> screen appears.
• The WARNING LOG LIST can display up to 1000 items. When
the number of items exceed this limit, the latest 1000 items
are displayed.
• button/turn JOG dial counterclockwise : Selection moves
to the next number.
• button/turn JOG dial clockwise : Selection moves to the
previous number.
• button : Displays the page with date prior to the date of
the currently opened page.
• button : Displays the page with date newer than the date
of the currently opened page.
When a failure occurs while the <WARNING LOG
LIST> is being displayed, exit the screen and display
the screen again. A new item will be added to the list.
Failures displayed in the WARNING LOG LIST
( see pages 92, 93).
<WARNING LOG LIST>
NO DATE
>>0001 02-02-03 10:00:00 ALM ON
"P-LOSS" : Power failure (the letters are displayed in red).
"SYS RST" : Reset button was pressed and the unit
was reset (the letters are displayed in red).
"ALM OFF" : The ALARM INTERRUPT button was
pressed and the unit was put on interruption (the let-
ters are displayed in green).
"ALM ON" : The ALARM INTERRUPT button was
pressed and the alarm interrupt was cancelled.
"REC ON" : The record was started.
"REC OFF" : The record was stopped.
"PS-OFF" : PASSWORD LOCK was unlocked.
"PS-1" : The PASSWORD level 1 was locked.
"PS-2" : The PASSWORD level 2 was locked.
"PS-3" : The PASSWORD level 3 was locked.
"PS-4" : The PASSWORD level 4 was locked.
"PS-E" : The SIMPLE LOCK was locked.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
RESET TO FACTORY SETTINGS
Menu screen settings are reset.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "RESET TO FACTORY
SETTINGS" in the <INFORMATION/SERVICE> screen. Turn
the SHUTTLE ring clockwise.
• The <RESET TO FACTORY SETTINGS> screen appears.
• When not resetting menu screen settings, turn the SHUTTLE
ring counterclockwise.
TIME WARNING