Fujitsu 8FX Hardware Manual page 226

CHAPTER 14 LIN-UART
14.2 Configuration
● Extended status control register (ESCR)
Its operating functions are as follows:
• Enabling/disabling LIN synch break interrupts
• LIN synch break detection
• Selecting LIN synch break length
• Direct access to SIN pin and SOT pin
• Setting continuous clock output in LIN-UART synchronous clock mode
• Sampling clock edge selection
● LIN-UART extended communication control register (ECCR)
Its operating functions are as follows:
• Bus idle detection
• Synchronous clock setting
• LIN synch break generation
■ Input Clock
The LIN-UART uses a machine clock or an input signal from the SCK pin as an input clock.
The input clock is used as the transmission/reception clock source of the LIN-UART.
204 FUJITSU SEMICONDUCTOR LIMITED
MB95630H Series
MN702-00009-2v0-E